Transmitting Stored Dtmf Numbers; Transmitting Single-Frequency Tones; Eee - Kenwood TH-235A Instruction Manual

TRANSMITTING STORED DTMF NUMBERS
To transmit a stored DTMF number, follow the procedure
below.
1 Press [PTT]+[MR].
e The display for selecting a DTMF memory channel
appears.
Se
ee ee
2. While holding down the PTT switch, press [1] to [5] to
select the desired channel.
e The number stored in the channel scrolls across the
display accompanied by DTMF tones from the speaker.
e After the transmission, the frequency display is restored.
TRANSMITTING SINGLE-FREQUENCY TONES
Use the following procedures to transmit single-frequency
tones.
1 Press [PTT]+[VFO] to enter Single-Frequency Tone
mode, then release [VFO].
2 While holding down the PTT switch, press [1] to [8] to
transmit the desired tone.
e Without releasing the PTT switch, press [VFO] to toggle
Single-Frequency Tone mode or Dual-Frequency Tone
mode.
3 Release the PTT switch to exit Single-Frequency Tone