Storing Simplex Frequencies Or Standard Repeater Frequencies - Kenwood TM-281A Instruction Manual

The data listed below can be stored in each Memory
Channel:
Parameter
R e c e v i e f e r q u e n y c
T a r n s m i f t e r q u e n y c
T o n e f e r q u e n y c
T o n e O N
C T C S S f e r q u e n y c
C T C S S O N
D C S c o d e
D C S O N
O f s f t e i d e r t c o i n
O f s f e f t e r q u e n y c
R e v e s r e O N
F e r q u e n y c s e t p s z i e
N r a o r w b a n d F M
B e t a S h t f i
M e m o y r C h a n n l e o l k c o t u
M e m o y r C h a n n l e n a m e
Yes: Can be stored in memory.
N/A: Cannot be stored in memory.
Simplex &
Odd-Split
Repeater
Y e s
Y e s
Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s N A /
Y e s N A /
Y e s N A /
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Y e s Y e s
Note:
◆ Memory Channel Lockout cannot be set to the Program Scan
Memory (L0/U0 ~ L2/U2), the Priority Channel (Pr), or the
Weather Alert Channel (AL).
◆ Tone, CTCSS, and DCS are automatically turned OFF when
setting up the Weather Alert Channel (AL).
STORING SIMPLEX FREQUENCIES OR STANDARD
REPEATER FREQUENCIES
1 Press [VFO].
2 Turn the Tuning control to select your desired
frequency.
• You can also directly enter a desired frequency using the
keypad {page 13}.
3 If storing a standard repeater frequency, select the
following data:
• Offset direction {page 23}
• Tone function, if necessary {page 24}
• CTCSS/ DCS function, if necessary {pages 46, 48}
If storing a simplex frequency, you may select other
related data (CTCSS or DCS settings, etc.).
4 Press [F].
• A Memory Channel number appears and blinks.
• " " appears if the channel contains data.
7
29