Memory Scan; Locking Out Memory Channels - Kenwood TH-235A Instruction Manual

MEMORY SCAN m@ Locking Out Memory Channels
Memory Scan allows all memory channels containing data Memory channels that you prefer not to monitor while
to be scanned. scanning can be locked out. Lock out any memory
1 Press [MR] (1s). channel with the following procedure:
« The 1 MHz decimal starts blinking.
« Scan starts with the channel last recalled. 2 Turn the Tuning control to select the desired
memory channel.
1 Press [MR] to enter Memory Recall mode.
2 To reverse the scan direction, turn the Tuning control.
« Upward scan: Turn the Tuning control clockwise.
e Downward scan: Turn the Tuning control
counterclockwise.
3 Press [F], [9] to toggle Lockout ON or OFF.
e "k" appears under the memory channel number that
was locked out.
3 To quit Memory Scan, press any key other than [MONI]
and [D].
Note:
@ Atleast 2 or more memory channels must contain data and must not
be locked out.
@ You can also start Memory Scan when in Channel Display mode.
2.5, <A SCN a tc nna