System Configuration - Planet Networking & Communication XGS-6320 Series User Manual

SNMP Community
An SNMP community is the group that devices and management stations running SNMP belong to. It helps define where
information is sent. The community name is used to identify the group. An SNMP device or agent may belong to more than one
SNMP community. It will not respond to requests from management stations that do not belong to one of its communities.
SNMP default communities are:
Write = private
。
Read = public
。
Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the following items:


System Configuration

 System Information
 SNMP Trap Configuration
 SNMPv3 Communities
 SNMPv3 Users
 SNMPv3 Groups
SNMPv3 Views

 SNMPv3 Access
4.2.2.2 System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object

Mode

Engine ID
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Configure SNMP on this page.
The system information is provided here.
Configure SNMP trap on this page.
Configure SNMPv3 communities table on this page.
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-2-2-2: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Enabled: Enable SNMP mode operation.

Disabled: Disable SNMP mode operation.
Indicates the SNMPv3 engine ID. The string must contain an even number
between 10 and 64 hexadecimal digits, but all-zeros and all-'F's are not allowed.
Change of the Engine ID will clear all original local users.
User's Manual of XGS-6320 Managed Switches
Figure 4-2-2-2
67
appears.