Ricoh Ri 1000X User Manual page 73

1. Before You Begin
Click on the [Print Mode] tab, and then specify [White] in [Special Colors].
< White >
• Off
Not printing white.
• Brightness - Black Substrate
Select this when using the black color on black materials for printing.
The black material is used for the black part of the image data, so neither the
white nor black ink is discharged as the undercoat. Thus, you can save on
white and black ink consumption.
•
Brightness
Select this when not using the color of the material for printing when printing
on red, blue or other deep color materials. Black ink is discharged for the
black part of the image data. To prevent the influence of the material's color,
it is required to apply white ink as the undercoat. If applying white ink, enter
the value in [Minimum]. (Recommended value: 30)
* The optimal value depends on the type of material. Adjust the value as
required.
•
Other settings, such as Pixel, Pixel invert, Selective, Filling, Flood, and Spot
See the operation manual for ColorGATE Productionserver or the help file.
(Help file: Processing Print Jobs > White and special colors > Printing
Special Colors: Introduction)
73
RICOH Ri 1000X User Manual