Ricoh Ri 1000X User Manual page 27

1. Before You Begin
After booting, the printer will perform initial ink charging if the ink is not charged.
Initial ink charging takes about 20 minutes.
NOTE – During the initial ink charging, do not lift the front cover. Also, do not pull out the ink
cartridge. During initial ink charging, if it is paused by lifting the front cover, hold down the
sub power button to reboot printer.
Once the initial ink charge is completed, the printer shows "Ready" in the upper left-hand corner
of the touch screen.
After completing the initial ink charging, proceed to the next step.
Perform a Nozzle check.
For details, see page 115 "NOZZLE CHECK".
27
RICOH Ri 1000X User Manual