Table of Contents
Advertisement
3. Maintenance
5.
Put the cleaning applicator in the space between the end face and the cleaning jig.
Wipe 5 to 10 times left and right. Wipe both rear and front-end face as well, and repeat this for
all heads.
IMPORTANT! Do not push the cover too strong. It may cause the damages.
6.
Holding the tabs on the sides of the Cleaning Jig, remove the Cleaning Jig from the
carriage.
7.
After removing the Cleaning Jig, check that there is no dirt on the entire head. If dirt
remains, remove it with an applicator.
Be careful not to touch the nozzle.
8.
After cleaning the Nozzle Cover, remove the tray or paper placed under the Head.
Note- Wipe off the used cleaning jig and keep it clean.
159
RICOH Ri 1000X User Manual
Advertisement
Table of Contents
