Table of Contents
Advertisement
@
VIDEO INPUT select switch
e To select an input video signal for recording.
Y/C443:
To record
the signal
input to the Y/C443
connector.
LINE:
To record the signal input to the VIDEO IN LINE
connector.
BLACK:
To record the internally-generated black burst
signal on a blank tape in preparation for insert
editing.
If set to this position during menu
setting, on-screen information is output from all
output connectors, not only the MONITOR OUT
connector.
@® REMOTE select switch
® To select between
remote
and local control
of the
recorder.
9-PIN:
For remote
control via the rear panel 9-pin
connector.
LOCAL:
For direct contro! with the recorder's function
buttons.
REM-2:
For remote control via the optional 45-pin or RS-
232C interface.
@ COUNTER select switch
® To select the time counter display mode with the SA-R22E
TC generator/reader installed. If this is not installed, CTL
signals are displayed regardless of the switch setting.
CTL:
CTL signals are displayed on the time counter.
TC:
Time
code
signals
are displayed
on the time
counter.
UB:
User bits are displayed on the time counter.
Advertisement
Table of Contents
