JVC BR-S622E Instructions Manual page 23

PROCEDURE
1. Press the REC and PLAY buttons simultaneously to start
recording.
@ Both the REC and PLAY LEDs will light.
@ To temporarily stop recording, press PAUSE/STILL .
e To resume recording, press PLAY.
2. Press the STOP button to stop recording.
~ RECORD-PAUSE & ASSEMBLE
EDITING.
The BR-S622E is equipped with an AEF function which
automatically backspaces the tape about 3 seconds whenever
the Record-Pause mode is engaged. In combination with the
rotary erase head, this assures clean, smooth editing
transitions.
1. Press the PAUSE/STILL button during recording. Recording
will stop but the REC indicator will remain lit.
e The tape automatically rewinds about 3 seconds of
programme time and stops in the Record-Pause mode.
Both the REC and PAUSE/STILL LEDs will light.
2. Press the PLAY button to restart recording.
e The recorder will play back the tape for 3 seconds, then
switch automatically to the Record mode at the point
where the PAUSE/STILL button was originally pressed.
© During the 3-second playback prior to re-engagement of
the Record mode, the picture seen on the screen is not the
playback picture, but the input signal.
REC button PLAY button
ane Dus PAUSE/STILL
oa
j
REW
oa
ST BY
fon
ele
STOP button
[eos]
PAUSE/STILL button
AUD DUB REC PLAY PAUSE{STILL
Ol lie
pre BY
C] Fl
PLAY button