Table of Contents
Advertisement
29
Menu
No.
On-Screen
Description
Counter
SYSTEM
306
307
309
310
311
312
313
314
315
LONG PAUSE TIME
LONG PAUSE
00
[01]
Settings
On-Screen
DISABLE
[ENABLE]
G8ARRBRSS
=
pany
LONG PAUSE
(STILL )
LONG PAUSE
(STOP )
[02]
1 SEC
10 SEC
30 SEC
1 MIN
2MIN
3 MIN
4MIN
[5 MIN]
STANDBY-OFF
T. RELEASE
[STEP FWD]
[00]
| [STANDBY-OFF}
ot
T. RELEASE
02
STEP FWD
:
STANDBY-OFF
MODE
00
DRUM ON
[01]
| [DRUMOFF]
02
UNLOAD
MODE AT TAPE
BEGIN
[00]
| [SHORT-FF]
MODE AT TAPE
END
PBPB/EE
PB/EE MODE
{00}
01
LOCAL FUNCTION
[00]
ot
02
08
PLAY
DISABLE:
To defeat Long Pause function.
ENABLE:
To use Long Pause function in Standby-On, Still and
Record-Pause modes. (Long Pause parameters are
selected with menu items #307, #308 and #309.)
With menu item #306 set to ENABLE, selects the length of time
before normal Pause (Standby-On, Still and Record-Pause) mode
changes to Long Pause.
Selects the contents of Long Pause mode. (After the time set with
menu item #307 expires in Still or Record-Pause mode, the VCR
operates as specified.)
STANDBY-OFF:
Enters Standby-Off mode.
T. RELEASE: Tension arm is released for tape protection. Still
pictures continue to be available.
STEP FWD: Tape advances in slow-motion for about 2 seconds
(about 2 frames). This action is repeated 5 times at the time
intervals set with menu item #307. The VCR enters the
Standby-Off mode after the final interval.
Selects the contents of Long Pause mode. (After the time set with
menu
item #307 expires in the Standby-On
mode, the VCR
operates as specified.)
STANDBY-OFF:
Enters Standby-Off mode.
T. RELEASE: Tension arm is released for tape protection.
STEP FWD: Tape advances in slow-motion for about 2 seconds
(about 2 frames). This action is repeated 5 times at the time
intervals set with menu item #307. The VCR enters the
Standby-Off mode after the final interval.
Selects the status of Standby-Off mode.
DRUM ON: Head drum continues to rotate with tape loaded.
DRUM OFF: Head drum stops rotating with tape loaded.
UNLOAD: Head drum stops rotating and tape unloads.
Selects the mode entered when the beginning of the tape is
detected.
SHORT-FF: Fast-forwards the leader section and enters Standby-
On mode.
PLAY: Enters Play mode.
[SHORT-REW]
[STOP /FF/REW]
STOP
[STOP ,EJECT]
STP,EJ,PLY,FF,
RW,STL
ALL ENABLE
ALL DISABLE
Selects the mode entered when the end of the tape is detected.
SHORT-REW: Rewinds the leader section and enters Standby-On
mode.
REW:
Rewinds to the beginning of tape and enters Standby-On or
Play mode depending on the setting of menu item #311.
Selects output signal in the mode specified with menu item #314.
PB/EE:
Outputs EE signal.
PB:
Outputs playback signal.
Selects the mode in which EE signal is output.
STOP /FF/REW: EE signal is output in Stop, FF and REW modes.
STOP : EE signal is not output in FF and REW modes.
Selects functions that can be locally operated when front parsel
REMOTE switch is set to SPIN or REM-2.
Advertisement
Table of Contents
