Table of Contents
Advertisement
VIDEO CassETTe RECORDER
BR-SG622E
FRAME
"© gaaaanea
AUD
'STAND BY
SiH
@ Time Code setting buttons
To preset time code/user bit data (with optional SA-R22E TC
generator/reader installed).
HOLD
button
This
button
is only
effective
when
the
SA-R22E's
PRESET/REGEN switch is set to PRESET.
® Holds the current counter data; the leftmost digit will blink.
SHIFT button
@ Shifts the blinking digit to the right. (You can also shift the
blinking digit in either direction by holding down the SHIFT
button and turning the JOG dial.)
ADV (ADVANCE) button
e@ Advances the value of the blinking digit. (You can also
change the value in either direction by holding down the
ADV button and turning the JOG dial.)
PRESET button
® Transfers the data set with the HOLD, SHIFT, and ADV
buttons to the time code generator.
® Automatically cancels the Hold mode.
® MIC jacks (AUD-1/L, AUD-2/R)
® For microphone connection. Input signal switches from
line to microphone.
®
®
PHONES jack/LEVEL control
e Connect a set of headphones to monitor sound recording.
@ Adjust output level with the LEVEL control.
Hi-Fi L/R and NORM AUD-1/AUD-2 AUDIO REC LEVEL
controls
® To separately
adjust recording
levels for the Hi-Fi
left/right-channel signals and the normal (linear) audio-1/2
signals.
e Optimum
level is the point where
the corresponding
meter's peak deflection is "0".
@ AUDIO MONITOR
select switches
e To select the audio output for the PHONES jack and the
AUDIO MONITOR OUT connector.
e@ The Hi-Fi/NORM
switch also switches the audio level
meters between Hi-Fi and NORMAL.
Hi-Fi:
To monitor the Hi-Fi audio signals.
NORM: _ To monitor the normal audio signals.
AUD-1/L:
To monitor the normal audio-1 or Hi-Fi left-
channel signal.
MIX:
To monitor the AUD-1/L and AUD-2/R signals
together.
AUD-2/R:
To monitor the normal audio-2 signal or Hi-Fi
right-channel signal.
Advertisement
Table of Contents
