Table of Contents
Advertisement
11
Apparpten far ¢ndast
axsiutas till j
'dat natuttag.
ote recucto] menutacifed once] teense
ny Laer
Cowpens
CB
aN
2E
WA
VOLTAGE SELECTOR
NOV-127¥
220V-240V
FUSE,
FrT4a
WARNING: DAI
@ AC IN socket
® Connect to
110 — 120 V or 220 — 240 V AC, 50/60 Hz power
outlet.
@ Fuse holder
© NORM AUDIO INPUT impedance select switch
ON:
600 ohms.
:
OFF:
10k-ohms. Normally set to this position.
@ Audio input connectors
AUDIO INNORMAL:
Normal
audio
input connectors
for
Audio-1 and Audio-2.
Hi-Fi audio input connectors for Left
and Right.
@ Audio output connectors
AUDIO QUT NORMAL:
Normal audio output connectors for
Audio-1 and Audio-2.
Hi-Fi audio output connectors for Left
and Right.
© Hi-Fi AUDIO INPUT impedance select switch
ON:
600 ohms.
OFF:
10k-ohms. Normally set to this position.
@, © VIDEO OUT LINE (1, 2) connectors
® The
composite
video
signal
is output
from
these
connectors.
©, ® VIDEO OUT Y/C443 (1, 2) connectors
® The Y/C443 signal is output from these connectors.
@ AUDIO MONITOR OUT connector
® The
audio signal selected with the AUDIO
MONITOR
select switches is available at this connector.
AUDIO IN Hi-Fi:
AUDIO OUT Hi-Fi:
> e@ee)|
US VOLTAGE
ey
te
'Der
Lnborrtorad ticorann torper
WARNING:SHDCK WAZARD-00 ROT OPEN
AVIS: RISQUE DE CHOC ELECTRIGUE-NEPAS OUVRIR.
VIDEO MONITOR OUT connector
e@ The composite video output signal is available at this
connector. On-screen information is also supplied.
Expansion slot
© For installation of optional interface (SA-K28E
or SA-
K27E).
NORMAL INPUT LEVEL select switch
© To select -6 dB, 0 dB, or +4 dB according to the level of the
normal audio input signal. Both channels are switched
simultaneously.
Hi-Fi INPUT LEVEL select switch
© To select -6 dB, 0 dB, or +4 dB according to the level of the
Hi-Fi audio input signal. Both channels
are switched
simultaneously.
AUDIO INPUT SELECT switch
H COM: "Hi-Fi Combined" recording. Set to this position to
record audio signals input to the AUDIO IN Hi-Fi
connectors on both the Hi-Fi and Normal audio
tracks.
SEP:
"Separate" recording. Set to this position to record
audio signals input to the AUDIO
IN Hi-Fi and
NORMAL connectors separately on the Hi-Fi and
Normal audio tracks.
N COM: "Normal Combined" recording. Set to this position to
record audio signals input to the AUDIO IN NORMAL
connectors
on both the Hi-Fi and Normal
audio
tracks.
Advertisement
Table of Contents
