Table of Contents
Advertisement
31
Menu
No.
SYSTEM
332
On-Screen
|
Settings
Explanation
CASSETTE SEL.
[00]
INHIBIT
334
TIME
400
CODE
401
404
405
406
407
408
409
CF SERVO LOCK
REPLY
CF RE-LOCK AT
[00]
PLAY
01
VITC POSITION-1
00
[12]
5
VITC
P
N-2
ITC
POSITIO
00
[14]
15
TCG REGEN MOD
[OFF]
OFF: Cassette size selection is possible with the CASSETTE
SELECT button on the front panel.
ON
ON:
Cassette size selection is inhibited.
Selects information to deliver to 9-pin remote.
DISABLE
DISABLE:
Colour frame servo lock cannot be engaged.
[ENABLE]
ENABLE:
Colour frame is locked to 4-field colour framing mode.
[DISABLE]
Activates or defeats colour frame re-lock function when colour
ENABLE
frame lock is disengaged in Play mode.
7LINE
Selects the horizontal scanning line on which VITC data is stored.
:
Selectable from line 7 to line 22 in the vertical blanking interval.
[19LINE]
© Do not select line 11 in S-VHS recording as this is reserved for
3
AUTO EQ.
22LINE
e@ When using the SA-T22E TBC board, set above line 9.
Selects the horizontal scanning line on which VITC data is stored.
7LINE
Selectable from line 7 to line 22 in the vertical blanking interval.
:
(Two lines per field are used to store VITC data.)
[21 LINE}
© Do not select line 11 in S-VHS recording as this is reserved for
DeLINE
AUTO EQ signal.
@ When using the SA-T22E TBC board, set above line 9.
Selects code data to be regenerated in Internal Regen mode (with
TC board's INT/EXT switch set to INT and PRESET /REGEN switch
[00]
TC SOURCE AT
REGEN
[00]
ot
LTC OUT (REGEN)
[00]
01
U-BIT BINARY
GROUP
[00]
ot
02
03
PHASE
CORRECTION BIT
00
[01]
VITC LINE
[00}
ot
EXT REGEN TC
[00}
ot
set to REGEN.)
TC & UB: Records both time code and user bit data in Regen mode.
TC:
Records time code data in Regen mode and user bit data in
Preset mode.
UB:
Records user bit data in Regen mode and time code data in
Preset mode.
[TC & UB]
wc
LB
Selects the type of reference time code in the Regen mode.
[LTC]
LTC:
Reference code is LTC.
VITC
VITC : Reference code is VITC.
Selects output signal from TIME CODE
OUT connector while
playback is in progress in Internal Regen mode.
[OFF TAPE]
OFF TAPE: Outputs time code signal picked up from tape.
TCG
TCG:
Outputs time code signal regenerated by TC generator.
Selects character set configuration to use TC generator's user bits.
[NOT SPECIFIED]
NOT SPECIFIED:
Character set configuration is not specified.
ISO CHAR.
ISO CHAR.:
8-Bit character set conforming to SO 646 and
ISO 2022 (with binary group flags at bit counts
43 and 59 in LTC; at 55 and 75 in VITC.)
UNASSIGNED-1: Undefined.
UNASSIGNED-2: Undefined.
Selects recording of LTC phase correction bit (parity bit for bit error
check).
OFF:
Not recorded. (Use this setting if 10s readout is not correct
with external TC reader connected.)
Recorded.
UNASSIGNED-1
UNASSIGNED-2
OFF
[ON]
ON:
Selects whether lines set with menu items #400 and #401 are to be
cleaned in recording.
VITC MIX:
VITC is recorded after lines are cleaned.
CLEAN ONLY:
Lines are cleaned.
[VITC MIX}
CLEAN ONLY
[LTC]
ViTC
Selects the type of externally input reference time code in External
Regen mode.
LTC:
Touse LTC via TIME CODE IN connector.
VITC: To use VITC via VIDEO IN connector.
Advertisement
Table of Contents
