JVC BR-S622E Instructions Manual page 7

Table of Contents

Advertisement

CASSETTE SELECT button
e Press to select FULL or COMPACT.
The corresponding
indicator(s) will light.
AUD-2/R (VIDEO/TRACKING) level meter
® Indicates the audio level of the normal audio-2 or Hi-Fi
right-channel signal during recording and playback.
e Functions as a video level meter during recording and as a
tracking meter during playback when the METER SELECT
switch @ is set to VIDEO/TRACKING.
AUD-1/L level meter
@ Indicates the audio level of the normal audio-1 or Hi-Fi left-
channel signal during recording and playback.
METER SELECT switch
© Switches the AUD-2/R level meter @ between audio level
and video level indication.
AUD-2/R:
Meter functions as the audio-2/Hi-Fi
right-channel level meter.
VIDEO/TRACKING:
Meter functions
as a video
level
meter in recording, and as a tracking
meter in playback.
@ Tape direction indicators
® Indicate the current tape direction.
[> : Forward
O : Still
<] : Reverse
JOG/SHUTTLE dials
® Dual concentric controls. The outer functions as a Shuttle
ting, the inner as a Jog dial. The Jog and Shuttle modes
can be entered directly from the Play, Still, FF, REW, or
Stop modes.
SHUTTLE ring: Search speed can be varied continuously
from 1/30 to 32 times normal (up to 14
times normal with C-size cassettes) in
forward or reverse. Set to the centre click-
stop position to engage the Still mode.
Manual frame-by-frame search in either
direction. Tape speed is determined by the
speed of dial rotation. Releasing the dial
engages the Still mode. Also used in edit
point trimming, menu setting and TC/UB
presetting.
JOG dial:
Control panel lock release buttons
® To tilt the control panel, press these buttons and lift the
panel at the same time. The panel can be tilted to 90° and
locked at angles of 25°, 50°, and 75°.
JOG/SHUTTLE button with JOG/SHTL mode indicators
@ Instantly re-activates the Shuttle mode with search speed
determined by the current dial setting.
Time counter
© Shows tape time in hours, minutes, seconds, and frames.
® Displays edit-in and -out points.
© Displays user bits.
® Displays menu settings and warnings.
@® Operation buttons with LED indicators
PAUSE/STILL
button
@ Displays a still picture when pressed in the Play mode.
PLAY button
e Starts playback.
REC button
AUD DUB button
STAND BY button
REW button
e Starts rewind when pressed in any mode.
STOP
button
e@ The STOP and STAND BY indicators will light.
FF button
COUNTER RESET button
e Resets the CTL counter to zero.

Advertisement

Table of Contents
loading

Table of Contents