Manager Settings.57 - Star Trac 4500 Owner's Manual

After having used your
STAR TRAC 4500 TREADMILL
for many workouts, you may
wish to change some of its settings.
Manager Settings
The Manager Settings allow you to query and modify the basic settings of your treadmill. To enter
Manager Settings:
• Press and hold [■],
Q,
and
|5TARTl
together.
• Release [Q.
• Listen for a beep and see MANAGER SETTINGS in the display momentarily.
• Release the remaining keys. See UNITS in the Alphanumeric Display.
The following keys are available in MANAGER SETTINGS:
\Y
^ J| INCLINE Keys: Display the next and previous data item, respectively. Keys will
repeat if held.
[+|—] SPEED
Keys: Adjust the value of the displayed data item up and down, respectively,
in increments of 1 unit or 0.01 unit, as appropriate for the data item. They do no save
the new value - see I START! below.
[START
I
Key: Updates (saves) the value of the displayed data item in erasable programmable
read-only memory (EPROM).
STOP
Key: Exits Settings Mode and restarts the treadmill greeting.
FI • • • fcl Number/Program Select Keys: Enter new data item values.
Heart Rate Key: Displays the default value of the data item, whereafter you may save
it using
ISTORTl-
To leave Manager Settings, press |
STAR TRAC4500 TREADMILL Owner's Manual
57