Star Trac 4500 Owner's Manual page 45

Hide thumbs Also See for 4500:

Table of Contents

FitLinxx

If your club or fitness center is equipped with FitLinxx and you have been assigned an active ID

number, just follow these steps:

Step One:

Step on the treadmill and enter your five digit FitLinxx ID number by pressing the

0—9 keypad (not all facilities are FitLinxx equipped, check with facility management

before entering an ID.) Once all five numbers are entered, press ENTER.

Step Two:

If your ID was valid, follow the scrolling instructions of: PRESS PROGRAM (to

choose one of the preset programs available on the TR4500) or PRESS START

(press the START key for immediate use of the treadmill) or PRESS "U" (to

choose a heart rate program). If your ID was invalid, try to enter your FitLinxx ID

again. If after a few attempts, your ID is not accepted, contact a club employee for

assistance.

NOTE:

You can pause your workout by pressing the "STOP" key once. Your program will pause

for a maximum of 30 seconds. You can resume the program by pressing the "START" key.

Step Three:

To stop the treadmill, press the "STOP" key twice. The running belt slows to a

stop.

Once you have completed your workout, time, distance and calories will automatically be sent to

the onsite FitLinxx management system for review by a qualified instructor or trainer.

STAR TRAC4500 TREADMILL Owner's Manual

Table of Contents