Table of Contents
Advertisement
9-2
Out going mail server setting
In the case that a authentication required mail server is used when a mail was sent, please set logon infor-
mation.
Authentication method will be either "POP before SMTP" or SMTP authentication.
Effective
With check: Authentication will act when a mail is sent.
Please set Incoming Mail Server or Outgoing Mail Server.
No check: Authentication will not act when a mail is sent.
Incoming Mail Server
The mail is sent under the authentication method of "POP before SMTP"
Incoming mail(POP3):
Account name
: Please input the account name of incoming mail server.
5
Password
: Please input the password of incoming mail server.
Outgoing Mail Server
The mail is sent by SMTP authentication.
Port
: Please input the Port number of incoming mail server.(default: 25)
Account name
: Please input the account name of outgoing mail server.
Password
: Please input the password of outgoing mail server.
Note
POP before SMTP: It is a method to sent a mail after the authentication incoming mail server is acted
before the mail is sent.
(Only System Controller Lite login into incoming mail server, so the mail will not be received.)
SMTP authentication: It is a method of outgoing mail server authentication when sent a mail.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Please input the name of incoming mail server.
107
5
Advertisement
Table of Contents
