Table of Contents
Advertisement
Type
Function
Allows control of selected indoor units
by the following operations:
Control
•On/Off •Operation mode •Room
temperature setting •Air flow rate and
direction •Economy (energy save)
Allows management of selected indoor
Management
units by the following operations:
•R/C prohibition •Filter sign reset
Saves 1 operation setting state of an
Memory
entire site and reproduces it with 1 but-
Operation
operation
ton. (Reproduction of special operation
control
pattern at the start of work is assumed)
Saves 1 operation setting state of the
operation control screen and repro-
Pattern
duces it with 1 button. (Shot of setting
operation
reset when hotel room vacated is as-
sumed)
Temperature
upper and
Sets the upper and lower limits of the
lower limit
indoor unit set temperature.
setting
Yearly/weekly schedule setting is pos-
sible.
Schedule timer
Week of year, Day of month, Day of
week, holiday/special day setting is
Schedule
possible.
The low noise mode set to the outdoor
Low noise
unit is executed by the weekly sched-
operation
ule.
Communication adaptor (U10 USB
NetWork Interface) used to set the
Adaptor
connection to VRF Controller.
setting
The name setting and the connection
status of the communication adaptor
can be confirmed.
Acquires model data of indoor units
Unit
and outdoor units of a specified re-
registration
frigerant system. (Model data: Node
identification included).
Scanning
Assigns a unique management No. to
indoor units acquired by scanning and
associates logical address and physi-
Unit name
cal address. Presents 3 kinds of alloca-
registration
tion: default name allocation, manual
allocation, and automatic allocation in
the order of indoor unit operation.
Performs allocation setting of up to
Group setting
1,600 groups in 3 nodes.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Controller Lite
Overview
Basic
22
System
Objective Series
V-II/V-III/VR-II/
Option
S/V
J-II/J-IIS
Remote
function
(Option)
(*1)
Advertisement
Table of Contents
