When "Select For Each Refrigerant System" is selected at , set items
Selects the adaptor (U10 USB Network Interface) which is to perform setting by pull-down menu.
Displays a list of the refrigerant systems connected to the adaptor selected at
Selects whether or not indoor units are included individually for each refrigerant system by checkbox.
5
When clicked, [Select All] or [Clear All] of
This is convenient when starting from the highest number when selecting the refrigerant systems indi-
vidually at . Reflected by range (adaptor units) displayed at .
[OK]:
Saves the edited contents and ends setting.
[Cancel]:
Ends setting without saving the edited contents.
Note
●
When setting is finished with [Select All] or [Clear All] checked at
All Indoor Units From The Calculation." or "Exclude All Indoor Units From The Calculation."
●
When the power meter or other contract contents were changed by resident or tenant updating, change
the setting at the same time.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
is checked.
5, the setting of
254
to 5.
.
becomes "Include