Electricity Charge Apportionment Setting - Fujitsu AIRSTAGE UTY-ALGX Instruction Manual

27.

Electricity Charge Apportionment Setting

Electricity Charge Apportionment option (UTY-PLGXA1) is necessary to use the electricity charge appor-
tionment function.
Performs basic settings related to electricity charge apportionment necessary before operation. May also
update the settings due to facility and tenant changes.
At initial starting after installation, perform setting in accordance with the following flow. For settings and
changes after operation starts, perform the necessary settings in accordance with the contents of par. 27-1
and subsequent paragraphs.
Flow at initial setting
Perform initial setting in accordance with this flow.
Understand electricity charge apportionment and confirming caution items – Read par. (27-1).
Check the items to be decided beforehand.
27-2 Electricity charge appor-
tionment main screen
Enable Disable
Apply
Basic Setting
Indoor Unit Setting
Parameter Setting
Contract Setting
Block setting
Execute
Calculation
28. Electricity charge appor-
tionment (operation)
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Apply
Apportionment not performed
Setting
27-3 Basic Setting
Specify the standby power distribution when
outdoor unit is non-communicating.
OK
or Cancel
Setting
27-4 Indoor unit electricity calculation setting
Setting whether or not the power consumption
of indoor units is included in calculation.
OK
or Cancel
Setting
27-5 Parameter setting
Units and externally linked devices power con-
sumption 5
OK
or Cancel
Setting
27-6-1 Contract list creation
Contract list creation, editing, deletion
OK
New
or Cancel
27-6-2 New contract creation and editing
Contract details setting
27-7-2 Specify Block screen
Block details 5
New
Setting
27-7-1 Block schedule setting
Block creation, editing, deletion
Schedule setting
OK
Common
or Cancel
27-7-3 Common block setting
Common block setting
242
or Edit
or Edit
Setting OK
Delete
OK
or Cancel
OK
or Cancel
Delete
or Cancel