Table of Contents
Advertisement
Overall operation is slow.
System Controller Lite is designed to run
on a PC of the specified performance, but
the operation speed varies depending on
the number of management points and
other loads. When the operating speed of
the System Controller Lite used appears
to be slow, the methods shown at the
right will increase the speed.
Not connected from client PC to server PC.
Network setting was not performed.
Port to outside the network is not open.
VRF Controller not started by server PC.
For internet connection: Client PC side in-
ternet provider or service PC side internet
provider is shut down for maintenance or
other reason.
After import, VRF Controller does not
restart.
Encryption settings do not match.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
1. Lighten the processing load
1) Close other applications running on the PC.
2) Change the settings that the load is lightened. Specifically,
•Reduce the number of managed units.
•Reduce the number of schedules.
2. Raise the PC specifications.
1) Increase the memory size.
2) Use a high performance PC
See 6. network setting of this manual and perform network setting.
Contact both the client side and server side network administrator, and
confirm that port numbers 9983 and 9984 are open.
Start the VRF Controller by server PC.
Wait awhile and then retry, or try contacting the provider.
Restart VRF Controller.
(→ See par. 11. Starting and ending the VRF Controller)
Match the encryption setting of the VRF Explorer (→ See par. 15-2 Site
setting) and the encryption setting of the VRF Controller. (→ See par.
12-2 Security setting)
283
Advertisement
Table of Contents
