Table of Contents
Advertisement
25-3
Outdoor unit capacity save
555555
Outdoor unit capacity save setting
It will limit the outdoor units capacity of each outdoor unit group to reduce used electricity.
To display this screen, select main screen menu → "Operation" → "Energy Saving", and click the "setting"
button on the Capacity Save Control area.
S
et the outdoor unit capacity save to be "Active" or "Not Active".
The list of outdoor unit group is displayed. Select operating rate for each outdoor unit group.
Temporarily operate at 90% in the beginning, and select other values as needed after checking the
benefits and comfort.
Select "Not Set" for the outdoor unit groups that are not controlled.
Note
The operating rate of 100% limits the outdoor units not to operate at more than their rated capacity.
When not set, an outdoor unit may operate at more than 100% capacity.
Button will be reversing displayed and the schedule will be selected by pressing schedule setting (A~D)
button. It will be not selected if you press it once again.
A pattern of one day set based on schedule (A~D) is displayed.
The day of the week displaying
Period displaying
Schedule pattern displaying (a day) The time of up to 4 pattern is displayed within color bar.
Set correspond schedules to be enable or disable.
5
Capacity Save Control Schedule Setting screen will be opened by pressing [Edit] button.
A selected Schedule pattern will be deleted by pressing [Delete] button.
If you select schedule, Edit button or Delete button will be enable.
Press [OK] button to save operating efficiency information in outdoor unit group list, outdoor unit ca-
pacity save schedules information and exit.
A set week day is displayed.
The applicable period of a set pattern is displayed.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
230
5
Advertisement
Table of Contents
