Table of Contents
Advertisement
12-2 Security setting
Performs setting when the Remote Access option is enabled.
Security setting sets the data encryption. Only the administrator can make this setting.
Select "Security Setting" from the task tray menu.
A Login screen appears. Enter the administrator's password.
A "Security Setting" screen appears. Click one of the items.
A: Encrypt transmitted data
B: Do not encrypt transmitted data
A
B
When the [OK] button is clicked, the set contents are reflected and security setting ends.
[Cancel] button
Ends security setting without saving the set contents.
[Apply] button
Saves the set contents.
(Security setting screen is displayed as it is.)
Note
●
Normally select "Transmitted data will be encrypted". If there are exceptional circumstances, "Transmit-
ted data will not be encrypted" can be selected.
●
If the encryption settings are different, the VRF Controller and VRF Explorer cannot communicate.
Match the VRF Explorer setting to the VRF Controller setting.
→ See par. 15-2 Site setting
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
116
Advertisement
Table of Contents
