Table of Contents
Advertisement
65555
Incoming setting (for dial-up connection)
When the client performs the connecting by dial-up, make the following settings.
Modem setting
„
„
Perform connection setting based on the connection procedure of the modem to be used.
Remote connection setting
„
„
Windows Vista
Display the network setting screen by sequentially selecting the menus as follows:
"start"→"Control Panel"→"Network and Internet"→ "Network and Sharing Center"→"Manage network
connections"
In the Network Connections screen, press "Alt" key. When the menu bar appear on the top, click "File",
then "New Incoming Connection..."
This screen sets the users who can connect to the computer. The users of the Operating System of
the machines are displayed. Check the users allowed to connect from the displayed list. (*1)
Verification is performed by the Operating System at incoming. For connection from the client, the
user set here and the password of that user must be input. (*2)
Information
*1.
When creating a new user, click [Add someone...] and create the user from the displayed screen.
*2.
Perform connection from the client from the screen par. 6-2-2 Dial-up setting.
Click [Next].
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
54
Advertisement
Table of Contents
