Correcting Problems; Indicator Lights - TransAct Ithaca 90PLUS Series Operator's Manual

64
Series 90PLUS Operator's Guide

CORRECTING PROBLEMS

INDICATOR LIGHTS

There are two indicator lights on the right side of the printer: READY and
FORM. The READY light may be red, green, or orange. The FORM light is
green.
READY Light FORM Light
Green OFF
Flashing Green OFF
Orange Slow Flash
Orange Fast Flash
Green OFF
Flashing Orange Slow Flash
Flashing Orange OFF
and Green
Flashing Orange OFF
Flashing Red OFF
The MICR reader has two LED's: green and red. The green LED indicates the
MICR reader is ready to accept a check for verification. The red LED indicates
a MICR misread.
Condition
The printer is ready to print.
The paper cover is open.
Form Status Conditions
Insert a slip form.
Insert a validation form.
Form is inserted.
A slip or check is jammed or
skewed. Remove the slip or
check, and press the
RESUME button.
Printer is low on receipt paper.
Error Conditions
The printer is out of paper.
Printer fault or knife fault has
occurred.
Printer State
READY
NOT READY
READY
ERROR