Changing The Print Head; Removing The Used Print Head - TransAct Ithaca 90PLUS Series Operator's Manual

58
Series 90PLUS Operator's Guide

CHANGING THE PRINT HEAD

REMOVING THE USED PRINT HEAD

4. The printer automatically positions the form to the top line.
If the form is not positioned correctly, the printer generates an error. The
READY light flashes orange. The FORM light flashes green, and the form
clamp is released. Remove the form, and press the RESUME button. Start
again at Step 2 above.
5. When the form is positioned properly, printing begins.
When printing is complete, the host releases the form.
5. Remove the form.
Replace the print head when characters are consistently misprinting.
Caution: The print head can get very hot.
Back of
Printer
1. Turn off the printer, and allow the print head to cool for at least three
minutes before replacing it.
On Off
Power
Switch