TransAct Ithaca 90PLUS Series Operator's Manual page 49

12
11
11. Place the take-up spool into the printer, lining up the gears.
12. Fold the edge of the journal ply, and insert it into the slot on the take-up
spool.
13. Press the FEED button to wind two or three turns of the journal ply onto
the take-up spool.
14. Close the paper cover, and tear off any excess receipt paper.
If at any time the paper does not feed, repeat the steps. If this does not
work, remove the paper and restart.
13
Setting Up the Printer
39