Check Verification (Micr) - TransAct Ithaca 90PLUS Series Operator's Manual

CHECK VERIFICATION (MICR)

1. The host system sends a MICR read request to the printer. The green LED
lights up indicating the printer is ready to verify a check.
2. Be sure the check is face up with the MICR characters on the right.
Position the check against the right side of the MICR reader table, and
slide the check into the MICR reader. The printer will automatically load
and read the check.
3. Remove the check.
Setting Up the Printer
Red
LED
Green
LED
MICR
Characters
Check
43