TransAct Ithaca 90PLUS Series Operator's Manual page 27

Note: Be sure to save the box and packing materials in case you
need to send the printer in for service.
1. Before removing the printer, examine the outside of the box for signs of
damage.
If any damage has occurred to the box, carefully examine the printer and
accessories before setting up the printer. Report all evidence of damage or
abuse to your dealer and shipper.
2. Open the box, and remove the paper and supplies envelope.
3. Carefully lift the printer out of the box, and set it on a sturdy, flat surface.
4. Separate the printer from the packing material.
Simply reverse these steps if you need to repack the printer to send in for
service. (You will not need to repack the supplies).
5. Check the printer and accessories for any signs of damage.
If the printer or any parts are damaged, report this to your dealer and
shipper immediately.
Setting Up the Printer
17