TransAct Ithaca 90PLUS Series Operator's Manual page 47

3
3. Place the roll in the printer, so the paper unwinds from the bottom (front).
4. Open the cutter unit.
5. Slide the edge of the paper under the cutter unit, and insert the paper
between the receipt roller and the paper load throat.
6. Turn on the printer, and press the FEED button until 12 inches of paper is
loaded.
With slight downward pressure, the paper feeds into the throat and around
the platen assembly.
2
Cutter
Unit
4
6
5
Setting Up the Printer
37