Table of Contents
Advertisement
58
IV. FRAME
9. FRAME
BODY
Disas.sembly
I. Remove the seaL
2
Remove the fuel tank.
3. Remove the air cleaner covers.
Remove the bolts and
remove the clamps securing the hoses leading to the
carbureton
Remove the air cleaner assembly.
4. Remove the front wheel, front forks, handlebar and
steering stem.
S. Remove the rear wheel, rear shock absorbers and rear
fork ass,,mbly.
6. Dismount the battery.
Disconnect theground (
-
) cable first
,
and U,en remove
the cable at the positive temtinal.
7.
Dismount the
engine.
&
Remove the rear fender by loosening off the attaching
nuts.
Discon11ect
the
wire
leads
of
the
tum
signal and
tail/stop lamp before removing the fende r.
9. Disconnect each wiring at the connector. Remove the
starter magnetic switch, regulator, turn signal relay.
silicon rectifier, main .switch, wan1ing horn and ignition
coil
fig.
4-76
Fig.
4-
77
(I)
Ajr cleaner assembly
(2) Hose clamp
Fig. 4-78
(1) Rear fender
Advertisement
Table of Contents
