Kyocera TASKalfa 352ci Operation Manual page 434

Appendix > Optional Equipment
(8) IB-36 "Wireless Network Interface Kit"
This is a wireless LAN Interface card which supports the wireless LAN specifications IEEE802.11n (Max 65 Mbps) and
11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is supported.
(9) MS-5100, MS-5100B "Manual stapler"
It can staple the originals or the printouts. The number of sheets that can be stapled together is 20 sheets (80 g/m
(10) Data Security Kit(E) "Data Security Kit"
The Data Security Kit overwrites all unnecessary data in the storage area so that it cannot be retrieved. The Data
Security Kit encrypts data before storing it in the SSD. It guarantees higher security because no data cannot be decoded
by ordinary output or operations.
(11) UG-33 "ThinPrint Option"
This application allows print data to be printed directly without a print driver.
4
Insert the SD/SDHC memory card into the SD/SDHC memory card slot.
5
Replace the covers and close the rear cover.
6
Insert the power cord into the socket and turn on the power switch.
11-7
2
).