Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Data Security
[System Menu/Counter] key > [System/Network] > [Data Security]
Configure settings for data stored in the optional SSD and machine's memory.
Item
SSD Initialization
Security Password
System Initialization
This changes security function settings.
NOTE
•
This function is displayed when the optional SSD is installed and the optional Data Security
Kit is activated.
•
Input of the security password is required to change security function settings. The initial
setting for the Security Password is "000000".
You can customize the security password so that only the administrator can use the security kit.
Enter a password that uses 6 to 16 alphanumeric characters and symbols.
You will need to enter the password again for confirmation.
IMPORTANT
Avoid any easy-to-guess numbers for the security password (e.g. 11111111 or 12345678).
This can be used to delete all the data stored in the SSD. Overwrite all the data stored in the
SSD when disposing of the machine.
IMPORTANT
If you accidentally turn the power switch off during initialization, the SSD might possibly
crash or initialization might fail.
NOTE
If you accidentally turn off power during initialization, turn it back on. Initialization will restart
automatically.
8-43
Description
Advertisement
Table of Contents
Troubleshooting
