Kyocera TASKalfa 352ci Operation Manual page 203

Operation on the Machine > Sending
Installing Driver Software (for Windows 10)
1
2
WSD scan
1
2
3
4
Right-click [Start] button on the Windows and select [Control
Panel] and then [View devices and printer].
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the
installation is completed.
Select [Send] on the Home screen.
Place the originals.
Loading Originals (page 5-2)
Display the screen.
Select [WSD Scan].
Scan the originals.
Procedure using this machine
1
[From Operation Panel] > [Next]
2
Select the destination computer > [OK]
Select [Reload] to reload the computer list.
You can view information on the selected computer by selecting [
3
Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1
[From Computer] > [Next]
2
Use the software installed on the computer to send the images.
5-30
].