Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Item
IPP
Protocol Setting
Port Number
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
IPP over SSL
Protocol Setting
Port Number
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
Raw Port
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
-
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX.
Value: Off, On
Set the IPP default Port Number. The default port number is 631.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
-
Select whether or not to use IPP over SSL.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Set the IPP over SSL default Port Number. The default port number is 443.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
-
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Description
*1, *3
8-34
*1
*1
*1
Advertisement
Table of Contents
Troubleshooting
