GS700TP Smart Switch Software Administration Manual
•
Status – Select the current link operation. The possible field values are:
–
Up – The LAG is currently linked and forwarding traffic.
–
Down – The LAG is currently not linked.
•
Reactivate Suspended – Select the action to apply to a suspended LAG. The possible
field values are:
–
Enable – Reactivate the suspended LAG.
–
Disable – Do not reactivate the suspended LAG.
•
Type – Displays the LAG type. The possible field values are:
–
Static – The LAG is configured manually.
–
LACP – The LAG is configured automatically.
•
Speed – Select the data transmission rate for the LAG. The LAG type determines what
speed setting options are available. The possible field values are:
–
10M – The LAG is currently operating at 10 Mbps.
–
100M – The LAG is currently operating at 100 Mbps.
–
1000M – The LAG is currently operating at 1000 Mbps.
•
Duplex Mode – Displays the duplex mode of the LAG. The possible field value is:
–
Full – The interface supports transmission between the device and its link partner in
both directions simultaneously.
•
Auto Negotiation – Select the auto negotiation status of the LAG. Auto Negotiation is a
protocol between two link partners that enables a port to advertise its transmission rate,
duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by
default. The possible field values are:
–
Enable – Enable auto negotiation.
–
Disable – Disable auto negotiation.
•
Flow Control – Select the flow control status of the LAG. Operates when the LAG is in
full duplex mode. Flow Control is disabled by default. The possible field values are:
–
Enable – Enable flow control.
–
Disable – Disable flow control.
2. Select the interface.
3. Enter or modify the fields in the first row.
4-6
v1.0, April 2008
Configuring Switching Settings