Address Table - NETGEAR Prosafe GS700TP Software Administration Manual

GS700TP Smart Switch Software Administration Manual
Multicast Forward All
• Interface – Displays the interface for which the Multicast settings are displayed.
• Interface Status – Select the interface status. The possible field values are:
– Static – The interface is added to the Multicast forward group statically.
– Forbidden – The interface is forbidden to join the mulitcast group.
– Excluded – The interface is not included in the Multicast group.
2. Select the VLAN ID from the list in the provided fields.
3. Select the port or LAG interface entry in the Multicast Group table.
4. Select the Interface Status from the list in the provided field in the first row.
5. Click APPLY to update the device.

Address Table

Packets addressed to destinations stored in either the Static or Dynamic databases are immediately
forwarded to the port. The Dynamic MAC Address Table can be sorted by interface, VLAN, or
MAC Address. Dynamic MAC addresses are learned from packets from sources that arrive at the
device, while Static addresses are configured manually.
An address becomes associated with a port by learning the port from the frame's source address
but if a frame that is addressed to a destination MAC address is not associated with a port, that
frame is flooded to all relevant VLAN ports. To prevent the bridging table from overflowing, a
dynamic MAC address, from which no traffic arrives for a set period, is erased.
The Address Table menu contains the following options:
• "Basic"
• "Advanced"
Basic
The Address Table Basic menu contains the following options:
• "Address Table"
Configuring Switching Settings
v1.0, April 2008
4-47