NETGEAR Prosafe GS700TP Software Administration Manual page 129

GS700TP Smart Switch Software Administration Manual
IGMP Snooping Configuration
To configure Advanced IGMP Snooping:
1. Click Switching > Multicast > Advanced > IGMP Snooping Configuration. The Advanced
IGMP Snooping Configuration screen displays:
Figure 4-26
The Advanced IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
• Status – Select the IGMP Snooping status on the device. IGMP Snooping is operational if
both the Status and Bridge Multicast Filtering fields are enabled. The possible field values
are:
– Enable – Enable IGMP Snooping on the device.
– Disable – Disable IGMP Snooping on the device.
• Bridge Multicast Filtering Status – Select the bridge Multicast filtering status on the
device. The possible field values are:
– Enable – Enable Multicast filtering on the device.
– Disable – Disable Multicast filtering on the device. If Multicast filtering is disabled,
Multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default
value.
Interface Settings
• VLAN ID – Displays the VLAN ID.
• Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
4-42
v1.0, April 2008
Configuring Switching Settings