NETGEAR Prosafe GS700TP Software Administration Manual page 183
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
2. Click REFRESH or CLEAR LOGS to refresh or reset the Memory Logs screen.
Flash Log
The Flash Log screen contains information about log entries saved to the log file in Flash,
including the time the log was generated, the log severity, and a description of the log message.
The message log is available after reboot.
To view the message logs in Flash:
1. Click Monitoring > Logs > Flash Log. The Flash Log screen displays:
Figure 7-4
The Flash Log screen contains the following fields:
•
Log Index – Displays the log number.
•
Log Time – Displays the time at which the log was generated.
•
Severity – Displays the log severity and urgency level. The following are the available log
severity levels:
–
Emergency – The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
7-6
v1.0, April 2008
Monitoring the Switch
Advertisement
Table of Contents
