NETGEAR Prosafe GS700TP Software Administration Manual page 41

GS700TP Smart Switch Software Administration Manual
3. If you selected Local, then enter the local Date and Time in the provided fields.
4. Select the Time Zone Offset from the list.
5. Click APPLY to update the system settings.
Note: If you selected SNTP, you must configure the SNTP servers. See
Configuration"
SNTP Server Configuration
The SNTP Server Configuration screen allows network administrators to define primary and
secondary SNTP servers. The system time is first retrieved through the primary SNTP server. If
the device is unable to retrieve the system time through the primary server, the device retrieves the
system time from the secondary server.
To configure SNTP servers:
1. Click System > Management > Time > SNTP Server Configuration. The SNTP Server
Configuration screen displays:
Figure 3-4
The SNTP Server Configuration screen contains the following fields:
• SNTP Server 1 – Enter the primary SNTP server IP address. The Primary SNTP server is
the first server used to retrieve the system time. The following option is available:
– Delete – Remove the currently configured SNTP Server 1.
• SNTP Server 2 – Enter the secondary SNTP server IP address
server retrieves the system time if the Primary SNTP server times out. The following
option is available:
– Delete – Remove the currently configured SNTP Server 2.
2. Enter the SNTP Server 1 and SNTP Server 2 in the provided fields.
3-6
for detailed instructions on configuring the SNTP servers.
v1.0, April 2008
"SNTP Server
.
The Secondary SNTP
Managing System Settings