NETGEAR Prosafe GS700TP Software Administration Manual page 110

GS700TP Smart Switch Software Administration Manual
To define Voice VLAN settings:
1. Click Switching > Voice VLAN > Basic > Properties. The Voice VLAN Basic Properties
screen displays:
Figure 4-16
The Voice VLAN Basic Properties screen contains the following fields:
• Voice VLAN Status – Select the Voice VLAN status on the device. The possible field
values are:
– Enable – Enable Voice VLAN on the device.
– Disable – Disable Voice VLAN on the device. This is the default value.
• VoiceVLAN ID – Select the Voice VLAN ID number.
• Class of Service – Select the CoS tag to add to untagged packets received on the voice
VLAN. The possible field values are 0-7, where zero is the lowest priority, and seven is
the highest priority.
• Remark CoS – Enable or disable reassigning the CoS tag value to packets received on the
voice VLAN. The possible field values are:
– Disable – Disable remarking the packet CoS tag value. This is the default value.
– Enable – Enable remarking the packet CoS tag value.
Configuring Switching Settings
v1.0, April 2008
4-23