NETGEAR Prosafe GS700TP Software Administration Manual page 181

GS700TP Smart Switch Software Administration Manual
– Informational – Provides device information.
– Debug – Provides debugging messages.
• Log File – Select the minimum message severity level to appear in the log file. The
following are the available message severity levels:
– Emergency – The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
– Alert – The second highest warning level. An alert log is saved, if there is a serious
device malfunction; for example, all device features are down.
– Critical – The third highest warning level. A critical log is saved if a critical device
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
– Error – A device error has occurred; for example, if a single port is offline.
– Warning – The lowest level of a device warning. The device is functioning, but an
operational problem has occurred.
– Notice – Provides device information.
– Informational – Provides device information.
– Debug – Provides debugging messages.
2. Select the minimum severity level for RAM logs.
3. Select the minimum severity level for FLASH logs.
4. Click APPLY to update the device.
Memory Log
The Memory Log screen contains all system logs in a chronological order that are saved in RAM
(Cache).
7-4
v1.0, April 2008
Monitoring the Switch