NETGEAR Prosafe GS700TP Software Administration Manual page 190
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
•
Multicast Packets Received – Displays the number of good Multicast packets received
on the interface since the device was last refreshed.
•
CRC & Align Errors – Displays the number of CRC and Align errors that have occurred
on the interface since the device was last refreshed.
•
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
•
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
•
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
•
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
•
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
•
Frames of 64 Bytes – Displays the number of 64-byte frames received on the interface
since the device was last refreshed.
•
Frames of 65 to 127 Bytes – Displays the number of 65 to 127 byte frames received on
the interface since the device was last refreshed.
•
Frames of 128 to 255 Bytes – Displays the number of 128 to 255 byte frames received on
the interface since the device was last refreshed.
•
Frames of 256 to 511 Bytes – Displays the number of 256 to 511 byte frames received on
the interface since the device was last refreshed.
•
Frames of 512 to 1023 Bytes – Displays the number of 512 to 1023 byte frames received
on the interface since the device was last refreshed.
•
Frames of 1024 to 1522 Bytes – Displays the number of 1024 to 1522 byte frames
received on the interface since the device was last refreshed.
RMON Summary Statistics
•
Interface – Displays the port or LAG for which statistics are displayed.
Monitoring the Switch
v1.0, April 2008
7-13
Advertisement
Table of Contents
