Technical specifications
8.4 Electromagnetic compatibility
8.3.2
Technical specifications DC power supply (DC)
Degree of protection
Protection class
Power supply characteristics
Input data
Voltage
Continuous current
Starting current (load-independent)
•
Active power
Output data
Voltages
Power output
•
•
•
8.4
Electromagnetic compatibility
See the note in "Applicability of technical specifications (Page 63)".
Interference emission
Immunity to interference
Interference immunity on the sup-
ply cables
Noise immunity on signal lines
Immunity to electrostatic discharge ± 6 kV contact discharge in accordance with IEC 61000-4-2
Immunity to RF interference
66
I²t value:
Continuous power
Temporary power (30 s)
Peak power (10 ms)
IP20 (in installed state)
VDE 0106
DC power supply
Nominal 12/24 V DC, 9-36 V DC, not electrically isolated
Max. 40 A for 1.6 ms
Max. 25 A for further 4 ms
EN 61000-6-3, EN 61000-6-4, CAN/CSA CISPR32 Class B;
KS C 9610-6-3; FCC Class A
EN 61000-6-1; EN 61000-6-2; KS C 9610-6-2
± 2 kV according to IEC 61000-4-4; burst
± 1 kV according to IEC 61000-4-5; symmetrical surge
± 2 kV according to IEC 61000-4-5; asymmetrical surge
± 1 kV acc. to IEC 61000-4-4; Burst; Length < 30 m
± 2 kV acc. to IEC 61000-4-4; Burst; Length > 30 m
± 2 kV acc. to IEC 61000-4-5; Surge; Length > 30 m
± 8 kV air discharge in accordance with IEC 61000-4-2
•
10 V/m 80 MHz – 2.7 GHz,
80% AM to IEC 61000-4-3
•
3 V/m 2.7 – 6 GHz,
80% AM to IEC 61000-4-3
•
10 V 10 kHz – 80 MHz,
80% AM according to IEC 61000-4-6
Operating Instructions, 09/2023, A5E53092695-AA
Max. 10.6 A
Max. 4.5 A²s
96 W
+12 V / 7.1 A
Max. 85 W
Max. 140 W
Max. 210 W
SIMATIC IPC PX-32A