Siemens SIMATIC IPC PX-32A Operating Instructions Manual page 21

Table of Contents

When you plan your project, you should make allowances for:

• The climatic and mechanical environmental conditions specified in the operating

instructions.

• Do not operate the device in severe operating conditions which are subject to caustic

vapors or gases.

• For installation in a cabinet, observe the SIMATIC setup guidelines as well as the relevant

DIN/VDE requirements or the applicable country-specific regulations.

• Always maintain a minimum clearance of 50 mm to the area of the ventilation slots and

do not cover the ventilation slots of the enclosure.

High frequency radiation

Immunity to RF interference

The device has an increased immunity to RF radiation according to the specifications on

electromagnetic compatibility in the technical specifications.

High-frequency radiation outside the specified interference immunity ranges can result in

device malfunctions.

Persons are injured and the plant is damaged.

• Avoid high-frequency radiation.

• Remove radiation sources from the environment of the device.

• Switch off radiating devices.

• Reduce the radio output of radiating devices.

• Read the information on electromagnetic compatibility.

• Read the information in the technical specifications.