Siemens SIMATIC IPC PX-32A Operating Instructions Manual page 48

Expanding and assigning parameters to the device
6.1 Opening the Device
Requirements
• The device is fully disconnected from the line voltage, see "Switching off the device
(Page 43)".
• All connecting cables are unplugged.
• Screwdriver of type Torx T10
Procedure
1. Remove the marked screws.
2. Tilt the PC enclosure away from the touch
panel.
3. Disconnect the three marked cables from
the motherboard.
Note: The gold-colored, right foil cable
must be unlocked beforehand.
4. Put down the front panel.
Close the device in reverse order.
48
Operating Instructions, 09/2023, A5E53092695-AA
SIMATIC IPC PX-32A