Ambient Conditions; Technical Specifications Of The Drives - Siemens SIMATIC IPC PX-32A Operating Instructions Manual

8.5

Ambient conditions

See the note in "Applicability of technical specifications (Page 63)".
Climatic ambient conditions
Temperature
- Operation
- Storage/transport
- Gradient
Relative humidity
- Operation
- Storage/transport
Air pressure
- Operation
- Storage/transport
Mechanical ambient conditions
Vibration
- Operation
- Storage/transport
Shock resistance
- Operation
- Storage/transport
1
8.6

Technical specifications of the drives

See the note in "Applicability of technical specifications (Page 63)".
SSD
SIMATIC IPC PX-32A
Operating Instructions, 09/2023, A5E53092695-AA
This information applies to the setting "Balanced" in the BIOS Setup, menu "Advanced" >
"Power&Performance" > "CPU Power Management Control" > "Power & Performance Sce-
nario"; the maximum ambient temperature must be reduced by 5 °C for the setting "Max
Performance".
Landscape format - horizontal:
• 0 to +50 °C
1
Horizontal format - inclined max. ± 45°:
• 0 to +50 °C
1
Portrait format - vertical:
• 0 to +45 °C
1
-20 to +60 °C
Max. 10 °C/h in operation, 20 °C/h storage, no condensation
tested to IEC 60068-2-78, IEC 60068-2-30
Temperature 0 °C to 30 °C, relative humidity 5 - 85%;
Permitted range: 0 to 31 °C: 5 ... 80%; decreasing linearly to 5 ...
25% at 55 °C
Temperature 25 °C - 55 °C, relative humidity 95%
1080 to 689 hPa (corresponds to an altitude of -1000 to 2000 m)
1080 to 660 hPa (corresponds to an altitude of -1000 to 3500 m)
tested according to DIN IEC 60068-2-6
5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s
5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s
Tested to IEC 60068-2-27, IEC 60068-2-29
half-sine 150 m/s , 11 ms
2
half-sine 250 m/s , 6 ms
2
M.2 NVMe SSD >= 256 GB, form factor 22 mm x 30 mm, type M
Technical specifications
8.5 Ambient conditions
2
2
67