Siemens SIMATIC IPC PX-32A Operating Instructions Manual page 33

2. Insert a mounting clip into the cutout provided on the device.
Note the correct position of the mounting clips.
3. To secure the mounting clip, tighten the grub screw with the slotted screwdriver, torque 0.5
Nm.
4. Repeat steps 2 and 3 for all mounting clips.
5. Check the fit of the mounting seal.
Position of the mounting clips for multi-touch devices
Fasten the mounting clips to the positions as illustrated. The number of mounting clips
depends on the device:
22" (12 x), 19" (12 x), 15" (10 x), 12" (9 x)
Device
22" display
19" display
SIMATIC IPC PX-32A
Operating Instructions, 09/2023, A5E53092695-AA
Installing and connecting the device
3.2 Installing the device
Position
33