Safety Instructions; General Safety Instructions - Siemens SIMATIC IPC PX-32A Operating Instructions Manual

Table of Contents

Advertisement

Safety instructions

2.1

General safety instructions

The installer of the system is responsible for the safety of a system in which the device
is integrated.
There is a risk of malfunction which could result in death or serious injury.
• Ensure that only suitably qualified personnel perform the work.
Risk due to electric shock
Risk of electric shock
The on/off button and on/off switch do not fully disconnect the device from the supply
voltage.
There is also a risk of fire if the device or connecting lines are damaged.
• Always fully disconnect the device from the supply voltage before performing work on
• For control cabinet mounting: Use a central, easily accessible AC circuit breaker close to
• When you install the device, make sure that the power supply connector is easily
Risk of lightning strikes
Risk of lightning strikes
A lightning flash may enter the mains cables and data transmission cables and jump to a
person.
Death, serious injury and burns may result.
• Disconnect the device from the power supply in good time when a thunderstorm is
• Do not touch power cables and data transmission cables during a thunderstorm.
• Keep sufficient distance from electric cables, distributors, systems, etc.
16
WARNING
WARNING
the device or when the device will not be used over an extended period of time.
the device, if possible.
accessible.
DANGER
approaching.
Operating Instructions, 09/2023, A5E53092695-AA
2
SIMATIC IPC PX-32A

Advertisement

Table of Contents
loading

Table of Contents