Whirlpool Pro-Style Manual page 7

4. Remove the oven bake burner screws and oven bake
burner. Rotate burner 90° to the left, and gently lay
on its side.
A. Oven bake burner screws
B. Oven bake burner
5. Lift up clip on the oven bake burner electrode bracket
with a finger or flat-blade screwdriver, and pull away
the electrode.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
D C
B
A
C. Oven bake burner electrode
bracket
D. Oven bake burner electrode
B
A
6. Pull electrode out of bracket.
A
B
A. Grasp electrode here.
B. Bracket
7. Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice
spud aside.
A
A. Gas orifice spud
8. Gas orifice studs are stamped with a letter and a number.
Install the Number 125 oven bake burner orifice spud.
9. Place Natural gas orifice in plastic parts bag for future use,
and keep with package containing literature.
7